Geared motor VN.M40 UP
VN.M40 UP
230 Vac
230 Vac gear motor with control unit, manual chain movement and 1/40 reduction rates | Plastic box that makes wiring the motor easier, thanks to the position of the front clip connector and the possibility of reaching three different positions with the wiring | Fitted with integrated deadman’s control unit (UP.VN), fitted with very low voltage 12 Vdc safety controls. Ideal for simple installations | Two accessories are available for chain drives with reduction rates 1:1 (off-axis motor installation) or 1:1.8 (torque or speed multipliers) | Maximum safety guaranteed during rapid release phases, thanks to a micro-switch that cuts the power supply to the motor | Oil lubricated reductions with hardened steel screw and bronze gears guarantee high performance, maximum reliability and silent operation | 4 micrometrically adjustable limit switches
| Power supply | 230 Vac (50-60Hz) |
| Motor supply | 230 Vac |
| Max absorbed current | 3.3 A |
| Max torque | 130 Nm |
| Maximum output rotations | 38 |
| Output speed | 24 r.p.m. |
| Shaft hole | 1” (25.4 mm) |
| Limit switch reduction ratio | 1/40 |
| Duty cycle | 30% |
| Protection level | IP40 |
| Built-in control unit | |
| Integrated receiver | |
| Encoder | |
| Operating temperature | -20°C /+50°C |
| Lubrication | OIL |
| Door surface area | 35 ㎡/max |
| Weight | 15.6 kg |
| N. motors per pallet | 24 |
UP.VN
APPLICATION
1 actuator for industrial doors, series VN.M20 UP, VN.M40 UP, VN.S20 UP, VN.S40 UP
CONTROL UNIT POWER SUPPLY
230 Vac - 50/60 Hz
MOTORS POWER SUPPLY
230 Vac / 1500 W
MAIN FUNCTIONS
Deadaman’s operating logic | Removable terminal boards | Separate inputs for OPEN and CLOSE commands in very low safety voltage 12 Vdc | Inputs diagnostics through LED
