Geared motor BULL624SW
Commercial use
24 Vdc
Up to 600 kg
Encoder signal recreated by the control unit beginning with the measurements of electric motor operation parameters. It is possible to manage slowing optimally and trace gate travel while providing the torque data in relation to its position to guarantee maximum safety
Intelligent power control system that allows obtaining dynamic data through a precise calculation of the thrust. The system is able to locate any critical points and adjust the torque accordingly in relation to actual requirements and according to measured performance
433.92 MHz Receiver equipped exclusively with Advanced Rolling Code (ARC)
This is a protocol for connection with KNX home automation systems by connection of the X.BE card (optional)
Predisposition to manage the control unit using the BeUP app and pro.UP accessory which, by recreating the control unit menu, makes it possible to adjust parameters and logic, read error messages and update the firmware. It is possible to perform remote diagnostics, check the status of the gate and send commands.
64 transmitters storable inside the receiver
Identifies motors or control units with power consumption in standby mode of ≤ 0,8 W.
BULL624SW
24 Vdc | intensive use
24 Vdc gear motor for intensive use with integrated control unit and virtual encoder | Switching power supply 115/230 Vac which reduces energy consumption and ensures a long lifespan of the actuator | Control unit with trimmers and dip-switches | The virtual encoder enables optimal management of slowing-down phases, movement tracking (STC system) and torque management in relation to the position of the gate, guaranteeing maximum safety | Operation guaranteed even in the event of a power supply failure through batteries that can be perfectly integrated in the motor (2 x 1.2 Ah) | Anti-crushing system with amperometric obstacle detection | Designed for the connection of the X.BE accessory in order to be integrated with KNX domotics installations and the programming through the app BeUP and the interface PRO.UP
Reinforced foundation plate Dima included. Dimensions 326x164.5x2 mm, motor fixing distance 301x75 mm, 4 holes Ø 8.5 mm
|
1x |
BULL624SW 24 Vdc gear motor for intensive use with integrated control unit and virtual encoder |
|
1x |
PUPILLA.T Pair of adjustable photocells with three positions, power supply 14÷30 Vac / 12÷30 Vdc | Option to mount 2 pairs close together without synchronization |
|
1x |
LAMPY Flashing light 12 ÷ 255 Vac / 14 ÷ 255 Vdc with integrated antenna |
|
1x |
TO.GO2VA 2-channel 433.92 MHz transmitter with Advanced Rolling Code and Rolling Code |
| Power supply | 115 / 230 Vac (50-60Hz) |
| Motor supply | 24 Vdc |
| Max absorbed current | 3.2 / 1.7 A |
| Maximum thrust | 715 N |
| Opening speed | 5.5 ÷ 11 m/min |
| Duty cycle | intensive use |
| Protection level | IP44 |
| Built-in control unit | |
| Integrated receiver | |
| Encoder | |
| Virtual encoder | |
| Magnetic limit switches | |
| Pinion for rack | M4 Z14 |
| Operating temperature | -20°C /+50°C |
| Lubrication | GREASE |
| Maximum gate weight | 600 kg |
| Weight | 8.0 kg |
| N. motors per pallet | 40 |
| Kit weight | 8.5 kg |
| N. kits per pallet | 40 |
CP.B24-SW
APPLICATION
1 actuator for sliding door series BULL SW
CONTROL UNIT POWER SUPPLY
230 Vac - 50/60 Hz
MOTORS POWER SUPPLY
24 Vdc / 8 A
POWER CONSUMPTION IN STAND-BY
0.8 W
MAIN FUNCTIONS
Parameter and operation logic regulations through trimmers, dip-switches and buttons | Integrated 433.92 MHz 64-codes radio receiver with ARC coding | Fixed terminal boards | Automatic, semi-automatic and Deadman logic | Motor limit switch inputs | Step by step, stop and photocell inputs | Photocell input programmable as active in opening-closing and photocell active only in closing | Stop input configurable as pedestrian | Output configurable as open gate indicator or second radio channel | Autoset of operating parameters | Electronic torque adjustment with automatic calculation for each point of the stroke (STC SYSTEM) | Separate electronic adjustments of opening and closing speeds | Anti-crushing safety through amperometric detection | Virtual encoder | Adjustable slowdowns | Built-in energy saving system ESA+ | Advantouch system to configure parameters and manage radio transmitters | Set up for connection to SW.CB battery charger (optional) | Set up for connection to KNX systems via X.BE card (optional) | Use of the pro.UP accessory and the BeUP app makes it possible to access an advanced programming level, to consult the number of manoeuvres and to protect the control unit with the password, in addition to making the diagnostics and firmware update functions available
