Geared motor BN.E24
BN.E24
PRODUCT BEING PHASED OUT
24 Vdc | intensive use
24 Vdc electromechanical operator for intensive use with integrated control unit and receiver | Suitable for gates installed on large posts | Operation guaranteed even in the event of a power supply failure through batteries | Amperometric sensor obstacle detection system to prevent crushing | Equipped with mechanical stop in opening | Option of adjustable wire unlock device that allows opening from the outside in the event of a power supply failure
|
1x |
BN.E24 24 Vdc electromechanical operator for intensive use with integrated control unit and receiver |
|
1x |
BN24 24 Vdc electromechanical operator for intensive use |
|
2x |
BA Articulated arm |
|
1x |
PUPILLA.T Pair of adjustable photocells with three positions, power supply 14÷30 Vac / 12÷30 Vdc | Option to mount 2 pairs close together without synchronization |
|
1x |
LAMPY Flashing light 12 ÷ 255 Vac / 14 ÷ 255 Vdc with integrated antenna |
|
1x |
TO.GO2VA 2-channel 433.92 MHz transmitter with Advanced Rolling Code and Rolling Code |
| Power supply | 230 Vac (50-60Hz) |
| Motor supply | 24 Vdc |
| Max absorbed current | 0.76 A |
| Torque | 125 Nm |
| Opening time | 10” |
| Duty cycle | intensive use |
| Protection level | IP44 |
| Version | KIT only |
| Built-in control unit | |
| Encoder | |
| Mechanical stop | adjustable in opening |
| Operating temperature | -20°C /+50°C |
| Lubrication | GREASE |
| Leaf max dimension | 2.1 m |
| Weight | 7,8 kg |
| Kit weight | 19.9 kg |
| N. kits per pallet | 20 |
CP.BN
APPLICATION
2 actuators for BEN series swing gates
CONTROL UNIT POWER SUPPLY
230 Vac - 50/60 Hz
MOTORS POWER SUPPLY
24 Vdc / 2.5 A + 2.5 A
MAIN FUNCTIONS
Integrated LCD display | Integrated radio receiver 433.92 MHz 64 codes with ARC coding | Removable terminal boards | Automatic and semi-automatic logic | Pedestrian, step by step and stop inputs | Separate photocell inputs in opening-closing and in closing phases | Step by step input can be configured as open | Pedestrian input can be configured as close | Output configurable as gate open indicator, service light or second radio channel | Output for connecting the flashing light | Autosetting of operating parameters | Separate electronic torque adjustment for each motor | Anti-crushing safety thanks to amperometric detection | Separate adjustable slow-downs for each motor | Advantouch system to configure parameters and manage radio transmitters | Number of maneuvers
